The construction of a cellophane lamination machine was carried out. The project began with a thorough review of various methods of heat-sealing film packaging. The machine can be used to seal low, medium and high density cellophane. The machine has a heating element which converts electrical energy into heat energy, which is utilized in the process of sealing cellophane. It has an efficiency of about 90% and has reasonable accuracy.
The main components of the machine include a transformer of 24-30 volts, heating element, electric wire, plywood, tape (paper, Teflon, black) lever machine, second hand, micro – switch and on/off indicator bulb.
The machine is relatively inexpensive and compares favorably with imported machines of the same capacity. The total cost of production is only ten thousand and one hundred naira.
1. Slight color change after laminating machine lamination.
2. Easy to operate, save time.
3. No bubbles, no wrinkles, no de-gluing.
4. More transparent, more protective.
5. No solvent pollution, healthy and green.
6. Environmental protection requirements, has been widely used by many western countries’ factories.
7. Suitable for ordinary hot laminating machine.
Applicable material | Plastic film,Paper |
Max.Mechanical speed | 200m/min |
Lamination width | 850,1050,1250,1450,1650mm |
Max.Unwind & rewind Dia. | Ф800,Ф1000mm |
Dry method | Electricity,Steam,Thermal oil or Gas |
Lida Printing & Packaging Machinery is specialized in R&D and production of printing equipment manufacturers and suppliers. The series include: rotogravure printing machine, dry lamination machine, high-speed coating machine, solvent-less lamination machine, inspection rewinder machine etc. All procedures from choosing suppliers, inspection of part processing, supervision of assembly, install & debug of complete set of machine have formed a complete system and flow so that the quality of our products are under control.
Leave a Reply