lida machine
lida machine
You are here: Home » News »

LTF-M High-Speed Composite Coater

LTF-M High-Speed Composite Coater Description:

LTF-M high-speed composite coater is made by introducing foreign advanced coater technology and combining its own years of experience in the production of coaters. It is widely used for silicone oil coating to produce release film products.

Aluminum Foil Coating Machine Equipment

LTF-M High-Speed Composite Coater Features:

1. LTF-M high-speed composite coater is controlled by a 10 frequency conversion motor, and the whole machine is controlled by automatic tension, so that the speed is kept synchronized.

2. The feeding rack is independent and adopts magnetic powder automatic tension control.

3. Anilox coating method: the coating scraper shaft adopts heavy double axis mechanical independent swimming, the scraper adjustment mode is manual with pneumatic, and the angle can be adjusted at will. The coating amount depends on the mesh line of the anilox roll. Different coating amount can be replaced with different mesh lines of the anilox roll.

4. The oven is 12 meters long and divided into 6 sections for independent temperature control. The electric heating hot air inlet drying system is used for heating. The heating box is external. The heating pipe is made of stainless steel with fins, and the adjustable internal circulation suction and exhaust device. The air inlet and exhaust are strong and dry.

5. The guide wheel in the oven is actively synchronized with the host machine, and the transmission is synchronous pulley driven, which can reduce the material stretching and deformation. The open top air cylinder oven and the membrane piercing operation platform make it easy for operators to work.

6. The middle tension of the coating roller – traction steel roller is synchronized with the floating arm type automatic tension control.

7. Automatic meter and speed control device.

8. EPC gas sensitive edge aligning machine is used for deviation correction, so as to ensure the tidiness of material reeling.

9. Key type air expansion shaft is adopted for retraction and retraction, which is convenient for loading and unloading.

10. High precision upward pressure traction device, steel roller cooling adopts water circulation type, through which the film is more flat, more scraping, and more cooling effect is achieved.

LTF-M High-Speed Composite Coater Technical Parameters:

Coated substrates Roll materials such as plastic film and paper
Max.Mechanical speed 200m/min
Web material width 850,1050,1250,1450,1650mm
Max.Unwind & rewind Dia. Ф800,Ф1000mm
Coating method Annix roller, dimple, comma scraper (optional)
Drying method Electric heating, steam heating, heat transfer oil heating or gas heating

LTF-M High-Speed Composite Coater Application:

Composite Film Printing Press

About Lida Printing & Packaging Machinery

Lida Printing & Packaging Machinery is specialized in R&D and production of printing equipment manufacturers and suppliers. The series include: rotogravure printing machine, dry lamination machine, high-speed coating machine, solvent-less lamination machine, inspection rewinder machine etc. All procedures from choosing suppliers, inspection of part processing, supervision of assembly, install & debug of complete set of machine have formed a complete system and flow so that the quality of our products are under control.
Composite Film Printing Press

Spread the love

Leave a Message

If you have any questions, please leave us a message and we will reply to you as soon as possible

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Please enter your message